1. Developing a Service using JAX-WS
    1. WSDL First Development
      1. Generating the Starting Point Code
        1. Running wsdl2java
        2. Generated code
      2. Implementing the Service
        1. Generating the implementation code
        2. Generated code
        3. Implement the operation's logic
        4. Example
    2. Java First Development
      1. Creating the SEI
        1. Writing the interface
        2. Implementing the interface
      2. Annotating the Code
        1. Required Annotations
          1. The {{@WebService}} annotation
          2. Annotating the SEI
          3. Annotating the service implementation
        2. Optional Annotations
          1. Defining the Binding Properties with Annotations
          2. The {{@SOAPBinding}} annotation
          3. Defining Operation Properties with Annotations
          4. The {{@WebMethod}} annotation
          5. The {{@RequestWrapper}} annotation
          6. The {{@ResponseWrapper}} annotation
          7. The {{@WebFault}} annotation
          8. The {{@Oneway}} annotation
          9. Example
          10. Defining Parameter Properties with Annotations
          11. The {{@WebParam}} annotation
          12. The {{@WebResult}} annotation
          13. Example
      3. Generating WSDL
        1. Example

Developing a Service using JAX-WS

You can develop a service using one of two approaches:

However, there are many cases where you may need to service enable an existing application. While JAX-WS eases the process, it does require that you make some changes to source code of your application. You will need to add annotations to the source. It also requires that you migrate your code to Java 5.0.

WSDL First Development

Using the WSDL first model of service development, you start with a WSDL document that defines the service you wish to implement. This WSDL document could be obtained from another developer, a system architect, a UDDI registry, or you could write it yourself. The document must contain at least a fully specified logical interface before you can begin generating code from it.

Once you have a WSDL document, the process for developing a JAX-WS service is three steps:

  1. Generate starting point code.

  2. Implement the service's operations.

  3. Publish the implemented service.

Generating the Starting Point Code

JAX-WS specifies a detailed mapping from a service defined in WSDL to the Java classes that will implement that service. The logical interface, defined by the wsdl:portType element, is mapped to a service endpoint interface (SEI). Any complex types defined in the WSDL are mapped into Java classes following the mapping defined by the Java Architecture for XML Binding (JAXB) specification. The endpoint defined by the wsdl:service element is also generated into a Java class that is used by consumers to access endpoints implementing the service.

The wsdl2java command automates the generation of this code. It also provides options for generating starting point code for your implementation and an ant based makefile to build the application. wsdl2java provides a number of arguments for controlling the generated code.

Running wsdl2java

You can generate the code needed to develop your service using the following command:
wsdl2java \-ant \-impl \-server \-d outputDir myService.wsdl

The command does the following:

Generated code

Table1 describes the files generated for creating a service.

Table 1: Generated Classes for a Service

File Description
portTypeName.java The SEI. This file contains the interface your service implements. You should not edit this file.
serviceName.java The endpoint. This file contains the Java class your clients will use to make requests on the service.
portTypeName{}Impl.java The skeleton implementation class. You will modify this file to implement your service.
portTypeName___portTypeName{}ImplPort_Server.java A basic server main() that allows you to deploy your service as a stand alone process.

Implementing the Service

Once the starting point code is generated, you must provide the business logic for each of the operations defined in the service's interface.

Generating the implementation code

You generate the implementation class for your service with wsdl2java's \-impl flag.

Tip

If your service's contract included any custom types defined in XML Schema, you will also need to ensure that the classes for the types are also generated and available.

Generated code

The service implementation code consists of two files:

Implement the operation's logic

You provide the business logic for your service's operations by completing the stub methods in portTypeName{}Impl.java. For the most part, you use standard Java to implement the business logic. If your service uses custom XML Schema types, you will need to use the generated classes for each type to manipulate them. There are also some CXF specific APIs that you can use to access some advanced features.

Example

For example, an implementation class for a service that defined the operations sayHi and greetMe may look like the following:

Implementation of the Greeter Service

package demo.hw.server;

import org.apache.hello_world_soap_http.Greeter;

@javax.jws.WebService(portName = "SoapPort", serviceName = "SOAPService",
 targetNamespace = "http://apache.org/hello_world_soap_http",
 endpointInterface = "org.apache.hello_world_soap_http.Greeter")

public class GreeterImpl implements Greeter {

 public String greetMe(String me)
{
        System.out.println("Executing operation greetMe");
        System.out.println("Message received: " + me + "\n");
        return "Hello " + me;
     }

 public String sayHi()
{
        System.out.println("Executing operation sayHi\n");
        return "Bonjour";
     }
}

Java First Development

To create a service starting from Java you need to do the following:

  1. Create a Service Endpoint Interface (SEI) that defines the methods you wish to expose as a service.

    Tip

    You can work directly from a Java class, but working from an interface is the recommended approach. Interfaces are better for sharing with the developers who will be responsible for developing the applications consuming your service. The interface is smaller and does not provide any of the service's implementation details.

  2. Add the required annotations to your code.

  3. Generate the WSDL contract for your service.

    Tip

    If you intend to use the SEI as the service's contract, it is not necessary to generate a WSDL contract

  4. Publish the service.

Creating the SEI

The service endpoint interface (SEI) is the piece of Java code that is shared between a service and the consumers that make requests on it. When starting with a WSDL contract, the SEI is generated by the code generators. However, when starting from Java, it is the up to a developer to create the SEI.

There are two basic patterns for creating an SEI:

Writing the interface

The SEI is a standard Java interface. It defines a set of methods that a class will implement. It can also define a number of member fields and constants to which the implementing class has access.

In the case of an SEI the methods defined are intended to be mapped to operations exposed by a service. The SEI corresponds to a wsdl:portType element. The methods defined by the SEI correspond to wsdl:operation elements in the wsdl:portType element.

Tip

JAX-WS defines an annotation that allows you to specify methods that are not exposed as part of a service. However, the best practice is to leave such methods out of the SEI.

The below shows a simple SEI for a stock updating service.

Simple SEI

package org.apache.cxf;

public interface QuoteReporter
{
  public Quote getQuote(String ticker);
}

Implementing the interface

Because the SEI is a standard Java interface, the class that implements it is just a standard Java class. If you started with a Java class you will need to modify it to implement the interface. If you are starting fresh, the implementation class will need to implement the SEI.

The below shows a class for implementing the above interface.

Implementation for SEI

package org.apache.cxf;

import java.util.*;

public class StockQuoteReporter implements QuoteReporter
{
  ...
public Quote getQuote(String ticker)
  {
    Quote retVal = new Quote();
    retVal.setID(ticker);
    retVal.setVal(Board.check(ticker));[1]
    Date retDate = new Date();
    retVal.setTime(retDate.toString());
    return(retVal);
  }
}

Annotating the Code

JAX-WS relies on the annotation feature of Java 5. The JAX-WS annotations are used to specify the metadata used to map the SEI to a fully specified service definition. Among the information provided in the annotations are the following:

Required Annotations

In order to create a service from Java code you are only required to add one annotation to your code. You must add the @WebService() annotation on both the SEI and the implementation class.

The @WebService annotation

The @WebService annotation is defined by the javax.jws.WebService interface and it is placed on an interface or a class that is intended to be used as a service. @WebService has the following properties:

Property Description
name Specifies the name of the service interface. This property is mapped to the name attribute of the wsdl:portType element that defines the service's interface in a WSDL contract. The default is to append PortType to the name of the implementation class.
targetNamespace Specifies the target namespace under which the service is defined. If this property is not specified, the target namespace is derived from the package name.
serviceName Specifies the name of the published service. This property is mapped to the name attribute of the wsdl:service element that defines the published service. The default is to use the name of the service's implementation class. Note: Not allowed on the SEI
wsdlLocation Specifies the URI at which the service's WSDL contract is stored. The default is the URI at which the service is deployed.
endpointInterface Specifies the full name of the SEI that the implementation class implements. This property is only used when the attribute is used on a service implementation class. Note: Not allowed on the SEI
portName Specifies the name of the endpoint at which the service is published. This property is mapped to the name attribute of the wsdl:port element that specifies the endpoint details for a published service. The default is the append Port to the name of the service's implementation class. Note: Not allowed on the SEI
Annotating the SEI

The SEI requires that you add the @WebService annotation. Since the SEI is the contract that defines the service, you should specify as much detail as you can about the service in the @WebService annotation's properties.

The code below shows the interface defined above with the @WebService annotation.

Interface with the @WebService Annotation

package com.mycompany.demo;

import javax.jws.*;

@WebService(name="quoteUpdater",
   targetNamespace="http://cxf.apache.org",
   wsdlLocation="http://somewhere.com/quoteExampleService?wsdl")
public interface QuoteReporter
{
  public Quote getQuote(@WebParam(name="ticker") String ticker);
}

The @WebService annotation above does the following:

  1. Specifies that the value of the name attribute of the wsdl:portType element defining the service interface is quoteUpdater.

  2. Specifies that the target namespace of the service is http://cxf.apache.org.

  3. Specifies that the service will use the pre-defined WSDL contract which is published at http://somewhere.com/quoteExampleService?wsdl.

The @WebParam annotation is necessary as java interfaces do not store the Parameter name in the .class file. So if you leave out the annotation your parameter will be named arg0.

Annotating the service implementation

In addition to annotating the SEI with the @WebService annotation, you also have to annotate the service implementation class with the @WebService annotation. When adding the annotation to the service implementation class you only need to specify the endpointInterface property. As shown in below the property needs to be set to the full name of the SEI.

Annotated Service Implementation Class

package org.apache.cxf;

import javax.jws.*;

@WebService(endpointInterface="org.apache.cxf.quoteReporter",
   targetNamespace="http://cxf.apache.org",
   portName="StockQuotePort",
   serviceName="StockQuoteReporter",
)
public class StockQuoteReporter implements QuoteReporter
{
public Quote getQuote(String ticker)
  {
  ...
  }
}

Optional Annotations

While the @WebService annotation is sufficient for service enabling a Java interface or a Java class, it does not provide a lot of information about how the service will be exposed as an endpoint. The JAX-WS programming model uses a number of optional annotations for adding details about your service, such as the binding it uses, to the Java code. You add these annotations to the service's SEI.

Tip

The more details you provide in the SEIthe easier it will be for developers to implement applications that can use the functionality it defines. It will also provide for better generated WSDL contracts.

Defining the Binding Properties with Annotations

If you are using a SOAP binding for your service, you can use JAX-WS annotations to specify a number of the bindings properties. These properties correspond directly to the properties you can specify in a service's WSDL contract.

The @SOAPBinding annotation

The @SOAPBinding annotation is defined by the javax.jws.soap.SOAPBinding interface. It provides details about the SOAP binding used by the service when it is deployed. If the @SOAPBinding annotation is not specified, a service is published using a wrapped doc/literal SOAP binding.

You can put the @SOAPBinding annotation on the SEI and any of the SEI's methods. When it is used on a method, setting of the method's @SOAPBinding annotation take precedent.

The following table shows the properties for the @SOAPBinding annotation.

Property Values Description
style Style.DOCUMENT (default)
Style.RPC
Specifies the style of the SOAP message. If RPC style is specified, each message part within the SOAP body is a parameter or return value and will appear inside a wrapper element within the soap:body element. The message parts within the wrapper element correspond to operation parameters and must appear in the same order as the parameters in the operation. If DOCUMENT style is specified, the contents of the SOAP body must be a valid XML document, but its form is not as tightly constrained.
use Use.LITERAL (default)
Use.ENCODED
Specifies how the data of the SOAP message is streamed.
parameterStyle ParameterStyle.BARE
ParameterStyle.WRAPPED (default)
Specifies how the method parameters, which correspond to message parts in a WSDL contract, are placed into the SOAP message body. A parameter style of BARE means that each parameter is placed into the message body as a child element of the message root. A parameter style of WRAPPED means that all of the input parameters are wrapped into a single element on a request message and that all of the output parameters are wrapped into a single element in the response message. If you set the style to RPC you must use the WRAPPED parameter style.

Specifying an RPC/LITERAL SOAP Binding

package org.eric.demo;

import javax.jws.*;
import javax.jws.soap.*;
import javax.jws.soap.SOAPBinding.*;

@WebService(name="quoteReporter")
@SOAPBinding(style=Style.RPC, use=Use.LITERAL)
public interface QuoteReporter
{
  ...
}
Defining Operation Properties with Annotations

When the runtime maps your Java method definitions into XML operation definitions it fills in details such as:

The @WebMethod annotation

The @WebMethod annotation is defined by the javax.jws.WebMethod interface. It is placed on the methods in the SEI. The @WebMethod annotation provides the information that is normally represented in the wsdl:operation element describing the operation to which the method is associated.

The following table describes the properties of the @WebMethod annotation.

Property Description
operationName Specifies the value of the associated wsdl:operation element's name. The default value is the name of the method.
action Specifies the value of the soapAction attribute of the soap:operation element generated for the method. The default value is an empty string.
exclude Specifies if the method should be excluded from the service interface. The default is false.
The @RequestWrapper annotation

The @RequestWrapper annotation is defined by the javax.xml.ws.RequestWrapper interface. It is placed on the methods in the SEI. As the name implies, @RequestWrapper specifies the Java class that implements the wrapper bean for the method parameters that are included in the request message sent in a remote invocation. It is also used to specify the element names, and namespaces, used by the runtime when marshalling and unmarshalling the request messages.

The following table describes the properties of the @RequestWrapper annotation.

Property Description
localName Specifies the local name of the wrapper element in the XML representation of the request message. The default value is the name of the method or the value of the @WebMethod annotation's operationName property.
targetNamespace Specifies the namespace under which the XML wrapper element is defined. The default value is the target namespace of the SEI.
className Specifies the full name of the Java class that implements the wrapper element.
The @ResponseWrapper annotation

The @ResponseWrapper annotation is defined by the javax.xml.ws.ResponseWrapper interface. It is placed on the methods in the SEI. As the name implies, @ResponseWrapper specifies the Java class that implements the wrapper bean for the method parameters that are included in the response message sent in a remote invocation. It is also used to specify the element names, and namespaces, used by the runtime when marshalling and unmarshalling the response messages.

The following table describes the properties of the @ResponseWrapper annotation.

Property Description
localName Specifies the local name of the wrapper element in the XML representation of the response message. The default value is the name of the method with Response appended or the value of the @WebMethod annotation's operationName property with Response appended.
targetNamespace Specifies the namespace under which the XML wrapper element is defined. The default value is the target namespace of the SEI.
className Specifies the full name of the Java class that implements the wrapper element.
The @WebFault annotation

The @WebFault annotation is defined by the javax.xml.ws.WebFault interface. It is placed on exceptions that are thrown by your SEI. The @WebFault annotation is used to map the Java exception to a wsdl:fault element. This information is used to marshall the exceptions into a representation that can be processed by both the service and its consumers.

The following table describes the properties of the @WebFault annotation.

Property Description
name Specifies the local name of the fault element.
targetNamespace Specifies the namespace under which the fault element is defined. The default value is the target namespace of the SEI.
faultName Specifies the full name of the Java class that implements the exception.
The @Oneway annotation

The @Oneway annotation is defined by the javax.jws.Oneway interface. It is placed on the methods in the SEI that will not require a response from the service. The @Oneway annotation tells the run time that it can optimize the execution of the method by not waiting for a response and not reserving any resources to process a response.

Example

The below shows an SEI whose methods are annotated.

SEI with Annotated Methods

package org.apache.cxf;

import javax.jws.*;
import javax.xml.ws.*;

@WebService(name="quoteReporter")
public interface QuoteReporter
{
  @WebMethod(operationName="getStockQuote")
  @RequestWrapper(targetNamespace="http://demo.mycompany.com/types",
      className="java.lang.String")
  @ResponseWrapper(targetNamespace="http://demo.mycompany.com/types",
      className="org.eric.demo.Quote")
  public Quote getQuote(String ticker);
}
Defining Parameter Properties with Annotations

The method parameters in the SEI coresspond to the wsdl:message elements and their wsdl:part elements. JAX-WS provides annotations that allow you to describe the wsdl:part elements that are generated for the method parameters.

The @WebParam annotation

The @WebParam annotation is defined by the javax.jws.WebParam interface. It is placed on the parameters on the methods defined in the SEI. The @WebParam annotation allows you to specify the direction of the parameter, if the parameter will be placed in the SOAP header, and other properties of the generated wsdl:part.

The following table describes the properties of the @WebParam annotation.

Property Values Description
name Specifies the name of the parameter as it appears in the WSDL. For RPC bindings, this is name of the wsdl:part representing the parameter. For document bindings, this is the local name of the XML element representing the parameter. Per the JAX-WS specification, the default is argN, where N is replaced with the zero-based argument index (i.e., arg0, arg1, etc.)
targetNamespace Specifies the namespace for the parameter. It is only used with document bindings where the parameter maps to an XML element. The defaults is to use the service's namespace.
mode Mode.IN (default)
Mode.OUT
Mode.INOUT
Specifies the direction of the parameter.
header false (default)
true
Specifies if the parameter is passed as part of the SOAP header.
partName Specifies the value of the name attribute of the wsdl:part element for the parameter when the binding is document.
The @WebResult annotation

The @WebResult annotation is defined by the javax.jws.WebResult interface. It is placed on the methods defined in the SEI. The @WebResult annotation allows you to specify the properties of the generated wsdl:part that is generated for the method's return value.

The following table describes the properties of the @WebResult annotation.

Property Description
name Specifies the name of the return value as it appears in the WSDL. For RPC bindings, this is name of the wsdl:part representing the return value. For document bindings, this is the local name of the XML element representing the return value. The default value is return.
targetNamespace Specifies the namespace for the return value. It is only used with document bindings where the return value maps to an XML element. The defaults is to use the service's namespace.
header Specifies if the return value is passed as part of the SOAP header.
partName Specifies the value of the name attribute of the wsdl:part element for the return value when the binding is document.
Example

The next example shows an SEI that is fully annotated.

Fully Annotated SEI

package org.apache.cxf;

import javax.jws.*;
import javax.xml.ws.*;
import javax.jws.soap.*;
import javax.jws.soap.SOAPBinding.*;
import javax.jws.WebParam.*;

@WebService(name="quoteReporter")
@SOAPBinding(style=Style.RPC, use=Use.LITERAL)
public interface QuoteReporter
{
  @WebMethod(operationName="getStockQuote")
  @RequestWrapper(targetNamespace="http://demo.mycompany.com/types",
     className="java.lang.String")
  @ResponseWrapper(targetNamespace="http://demo.mycompany.com/types",
     className="org.eric.demo.Quote")
  @WebResult(targetNamespace="http://demo.mycompany.com/types",
     name="updatedQuote")
  public Quote getQuote(
     @WebParam(targetNamespace="http://demo.mycompany.com/types",
               name="stockTicker",
               mode=Mode.IN)
               String ticker
  );
}

Generating WSDL

Once you have annotated your code, you can generate a WSDL contract for your service using the java2wsdl command.

Example

The next example shows the WSDL contract generated for the SEI shown above:

Generated WSDL from an SEI

<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://demo.eric.org/"
    xmlns:tns="http://demo.eric.org/"
    xmlns:ns1=""
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ns2="http://demo.eric.org/types"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
  <wsdl:types>
    <xsd:schema>
      <xs:complexType name="quote">
        <xs:sequence>
          <xs:element name="ID" type="xs:string" minOccurs="0"/>
          <xs:element name="time" type="xs:string" minOccurs="0"/>
          <xs:element name="val" type="xs:float"/>
        </xs:sequence>
      </xs:complexType>
    </xsd:schema>
  </wsdl:types>
  <wsdl:message name="getStockQuote">
    <wsdl:part name="stockTicker" type="xsd:string">
    </wsdl:part>
  </wsdl:message>
  <wsdl:message name="getStockQuoteResponse">
    <wsdl:part name="updatedQuote" type="tns:quote">
    </wsdl:part>
  </wsdl:message>
  <wsdl:portType name="quoteReporter">
    <wsdl:operation name="getStockQuote">
      <wsdl:input name="getQuote" message="tns:getStockQuote">
    </wsdl:input>
      <wsdl:output name="getQuoteResponse" message="tns:getStockQuoteResponse">
    </wsdl:output>
    </wsdl:operation>
  </wsdl:portType>
  <wsdl:binding name="quoteReporterBinding" type="tns:quoteReporter">
    <soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
    <wsdl:operation name="getStockQuote">
      <soap:operation style="rpc"/>
      <wsdl:input name="getQuote">
        <soap:body use="literal"/>
      </wsdl:input>
      <wsdl:output name="getQuoteResponse">
        <soap:body use="literal"/>
      </wsdl:output>
    </wsdl:operation>
  </wsdl:binding>
  <wsdl:service name="quoteReporterService">
    <wsdl:port name="quoteReporterPort" binding="tns:quoteReporterBinding">
      <soap:address location="http://localhost:9000/quoteReporterService"/>
    </wsdl:port>
  </wsdl:service>
</wsdl:definitions>